New 180sx Pics
The car needs to be lowered but my recent addition exhaust isn’t sitting the way it should and i’m blaming the flange on the decat as it’s sitting too low and it’s no where near the bumper anymore, but on a plus note I have new tyres to replace my bald and cracked front ones..
Rolling Road
added my car to a Rolling Road day list last month, but all this month ive had trouble involving my MOT, had it booked in last week and it failed big time. Emissions have become a problem at nearly 20x over the minimum requirement of the test but i had still paid for this Rolling [...]
Marteh is a professor!
Shit the bed look at these pics..
5 stud conversion & wheels
Well FINALLY i have managed to get the front 5 stud conversion done in just short of 2 months :( the time it took me was more down to being messed around by the engineer that i used, which i can tell you now is never going to happen again unless they buck up.
Anyway to [...]
Five stud rear conversion
After a quick read of the ‘How to’ I got to work and, other than a small incident involving my driveshaft and a hammer, everything went according to plan.
I stuck the 10.5″ SSR wheels on the back - they looked pretty good:
Fresh pics
Nothing much has changed - apart from me damaging my rear alloy and having to swap them to standard 200sx facelift wheels from my old car.
But it was a sunny day and the car was clean and I needed to blow the dust off the camera so took it to a local multistorey carpark for [...]
Received my wheels today
I finally received my SSR Professor wheels today and mananged to get some specs:
Fronts - 18×9.0 ET+24 with 225/40/18
Rears - 18×10.5 ET+18 with 265/35/18
I took one of the rear wheels out and lined it up next to my sorry looking car..
New wheels
Its been a bit quiet as the car is away getting its subframe swapped over, yesterday as i was coming home from work i jumped on the computer and a friend of mine had left a link to a website on my msn so i clicked the link and my heart jumped into my throat [...]
Kouke Carbon Cover
Recently Purchased a Carbon cover for my car, and a little thanks to joe for letting me know how simple it was to order it from the states.
For me at the exchange rate at the time came at just over £100 but still worth it.
Here’s a pic







